Products Catalog

Specification

* One panel monitors 2 extinguishing sections.
* Each section is equipped with 3 outputs to activate extinguishing
alert‚ extinguishing section separation and gas release. 3 inputs serve
as confirmation of above control outputs.
* The device is connected via B-Bus. The address is set with a DIPswitch.
* Important information of the extinguishing section are displayed on
the control unit.
* Parameters can be configured on the panel directly or via PC-Tool.
* External control wires are monitored for short or open circuit.
* Panel can be set to automatic mode and manual mode.
* Panel supports auto mapping feature .