Products Catalog

Specification

Can measure very low effective power, for stand-by mode of home use equipment :

* Ultra high-sensitive measurement, for use to measure an effective power of equipment in stand-by mode: Current 1.0000 mA full-scale, 0.1 µA resolution
* Wide measurement range, up to 50.000 A direct input

Basic specifications :

Measurement lines : Single-phase/two-wire
Measurement items : Voltage, Current, Current peak, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Power integration, Current integration
Measurement ranges : Voltage: 15.000 V to 600.00 V, 6 ranges, Current: 1.0000 mA to 50.000 A, 15 ranges, Power: 15.000 mW to 30.000 kW, 90 ranges, Frequency: 1 Hz to 100 kHz, auto or 2 ranges
Integration range : 0 to ±999999 MAh/MWh, (integration time up to 10000 hours)
Wave peak measurement : Current (displays maximum absolute value)
Basic accuracy : ±0.1 % rdg. ±0.1 % f.s. (active power, at 45 to 66 Hz)
Frequency characteristics : 1 Hz to 100 kHz (1 Hz to 100 kHz at 20 A or less, 1 Hz to 10 kHz at 20 A to 30 A, 50/60 Hz at 30 A to 50 A )
Signal output : Analog level: Voltage, current, active power, 5 V DC f.s., Waveform monitor: Voltage, current, 1 V rms f.s.
Other functions : Comparator function for 2 items Scaling function (PT/CT/SC), Displays a moving average function, GP-IB/RS-232C interface
Sampling rate : 5 times/second
Power supply : 100 to 240 V AC, 50/60 Hz
Dimensions, mass : 210 mm(8.27 in)W × 100 mm(3.94 in)H × 261 mm(10.28 in)D, 2.5 kg (88.2 oz)
Accessories : Power cord (1), Connector for EXT I/O (1)