Products Catalog

Specification

Non-Metallic Contact for Optimal Safety :

- Top “primary supply level� safety class rating for phase detectors
- CAT III 600V design meets CE Mark qualifications.
- Provides both visual and audible phase detection
- Detects phase on insulated conductors
- Auto power-off function prevents inadvertent battery discharge

Basic specifications :

Measurement Function : Phase detection (positive,negative),live wire check (R-S/S-T only)
Voltage Detection Method : Electrostatic induction method
Voltage Range : 70 to 600V AC (50/60Hz)(sine wave,continuous input)
Clamp Diameter : 17mm(0.67 in) max.of insulated wiring
Display : Phase Detection : Positive ; 4 LEDs lit in clockwise order and 3 short beeps
Negative ; 4 LEDs lit in counterclockwise order and one continuous beep
Live Wire Check : R-S and S-T lamps will light if voltage between wires are within voltage range

Battery Check Function : ON lamp blinks to indicate battery low status when instrument is turned on
Auto Power Off : Auto shut off if no activity is detected after power is turned ON for 15 minutes
Power supply : Two AA size batteries × 2 (rated voltage:DC3.0V; maximum rated ower:300mVA)
Continuous Use : approx.70 hours (standby)
Dimensions, mass : 70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 200 g (7.1 oz),
Cord length : 0.7m(27.56 in)
Accessories : Carrying case(1), strap(1), R6P manganese batteries(2), spiral tube(1)