Products Catalog

Specification

Description
1/ 8 DIN panel mount pH transmitter with 4-20 mA output and calibration by potentiometers. ATC temperature control uses a Pt-100 or simulation resistor. Features a large LCD display and uses a BNC input and spade lug screw type connector block

* All solid state design
* ATC
* Low power consumption design, reduced internal heating thus increased reliability
* 0.56 high LCD display
* Isolated 4 to 20 mA current output
* High stability and fast response
* 1/ 8 DIN standard aluminum case
* Easy to install
* Heat cycled 100 hours before shipment

Specifications
pH
Range : 0.00 to 14.00 pH Resolution : 0.01pH
Accuracy : ± 0.02 pH ± 1 LSD

General

* Input impedance: Greater than 10 to 12th ohms
* Temp. compensation: Auto 0 to 100 ° C
* Current output: Isolated 4 to 20 mA
* Current accuracy: 0.1%
* Max transmitter load: 600 ohms
* Isolated voltage: 500 VDC min
* Display: 0.56 high LCD
* Power source: 115/ 230 VAC ± 10% , 50/ 60 hz
* Dimensions: 96 mm x 48mm x 152mm
* Weight: 0.58 kgs
* Temperature sensor: Pt-100