Specification :

FE 50 R/ L magnetic drilling machine
Motor power: 1150 Watt
Spindle: Morse taper 2 - 19 mm ( 3/ 4" ) Weldon
Hole cutter / annular cutter short: Ø 50 mm ( 2" )
Hole cutter / annular cutter long: Ø 50 mm ( 2" )
Countersink: Ø 40 mm ( 1-9/ 16" )
Reaming: Ø 23 mm ( 7/ 8" )
Twist drills: Ø 23 mm ( 7/ 8" )
Tapping: M20
RPM: I 50-250 min-1 - II 100-450 min-1
Stroke: 150 mm ( 5.91" )
Weight: 13 Kgs ( 26.8 Lbs)
Magnet power: 1700 kgs ( 3748 Lbs)

Why you should choose for FE 50 R/ L magnetic drilling machine:
FE 50 R/ L versatility in a compact form. The exchangable morse taper 2 makes this magnetic drill an allround machine for all drilling purposes. The variable speed and right/ left option enable this magnetic drill to also be used for tapping / threading, reaming and countrsinking. This magnetic drill is powered by a strong 1150 watt Eibenstock drill. An continuous internal coolant system is an optional supply for this machine. For all available cutting oils. please check our cutting oil section of our website.. To be able to use other manufacurers cutters in the FE 32 R/ L please check out the adapter section on our website.

All our machines can be supplied in 110 Volt as well as in 230 Volt.

Standard delivery of FE 50 R/ L mag drill contains:
1 mag drill
1 Morse taper no 2
1 pilot pin ( Ø 6.35x79 mm)
1 pilot pin ( Ø 6.35x103 mm)
1 Morse taper no 2 remover
1 transport carrying case
1 drill chuck
1 adaptor B16-Morse taper 2
1 tapholder M10
1 tapholder M12
1 tapholder M16
1 safety chain
1 manual