Specification :

Type:
Electrical operated, variabel speed, stencil duplicator, electrical operation controlled by printed circuit logic board.
Feed:
Primary and secondary feed for ISO ' A' standard registration. Control provided to adjust primary feed pressure for different weights of paper, print height adjustable by 63 mm overal, lateral positioning 11 mm overall.
Feedboard:
Capacity is 55 mm ( approx one ream) of 80 g/ m2. Adjustable side guides and sawtooth scale assist in correct positioning of paper.
Stencil Loading:
Semi automatic under the control of machine stop/ start button.. Correct stencil tension provided by closing machine top cover
Delivery:
Adjustable controlled delivery unit, incorporating jogging action, with moveble back and side fences
Inking:
Automatic plus power boost. Distribution pattern and quantity can be altered witd dedicated controls
Speed:
Variable between 40 and 130 c.p.m two push button controls increase or decrease speed in 10 c.p.m increaments
Counter:
Manually operated four digit counter shuts off motor and feed
Paper Size:
minimum 76 x 127 mm
maximum 276 x 396mm
Paper weights:
min 42g/ m2 - max 187 g/ m2
Dimension:
Length close 506 mm
open 1080 mm
width 558 mm
height 389 mm
Weight:
37 kg
power110v 60hz, 220V 50hz