Specification :

Product Specifications

Specifications :
Number of membranes 3
Membrane DOW Filmtec SWRO 3x21�
Power consumption* 720 W
Water production* approx 4800 l/ day ( 1270 GPD* * )
* Design parameter: Output 200 l/ h, 3 phases 400 Volt 50 Hz, 25 C sea water at 35.000 TDS + / - 15%
* * Measured in US Gallons

Connections :
Electrical specifications 3 phases 230 V 50/ 60 Hz
3 phases 400 V 50/ 60 Hz
1 phase 110V/ 230V 50/ 60 Hz w/ Danfoss VFD/ VLT only
Feed water inlet* Ø 19mm
Fresh water flush inlet Ø 19mm
Brine outlet Ø 19mm
Permeate outlet Ø 19mm
* Pipe connections: All measurements are internal diameters

Operating limits :
Feed water temperature 5 – 45 C ( 41 – 113 F )
Ambient temperature 5 – 45 C ( 41 – 113 F )
Feed pressure 2 – 5 bar ( 29 – 72 PSI )
Fresh water flush pressure 2 – 5 bar ( 29 – 72 PSI )
Minimum feed water flow 1.2 m3/ h ( 5.3 GPM )
Minimum fresh water flush flow 1.2 m3/ h ( 5.3 GPM )
Maximum pressure drop permeate line 0.2 bar ( 2.9 PSI )

Feed water requirements* :
Total dissolved solids ( TDS) 15000 – 50000 mg/ l
SDI rating ( 15 min.) < 3 SDI
Turbidity < 1 NTU
Free chlorine/ total chlorine < 0.1 mg/ l
Total Organic Carbon ( TOC) < 3 mg/ l
Hydrocarbons or silicone based oils < 0.1 mg/ l
Ferrous iron < 4 mg/ l ( pH