PT. Taharica ( Distributor, Agent, Service)

KBM/ KCM type ( metal type)
Compact, lightweight design ;

* Simple design featuring a plastic case,
* Plastic case material features exceptional resistance to chemical....

They are pin-bushing couplings using aluminum alloy for the body material. Each component is a rigid body and has a high rigidity. By a combination of high-precision pin and dry....

It is a pin-bushing coupling using aluminum alloy for the body material. Each component is a rigid body and has a high rigidity. By a combination of high-precision pin and dry....

Features:
High-efficiency, low-noise.

High-ratio hypoid gears are subject to CBN grinding following heat treatment to remove distortions in the metal, ensuring high....

High-efficiency, low-noise.

High-ratio hypoid gears are subject to CBN grinding following heat treatment to remove distortions in the metal, ensuring high-efficiency, low-noise....

The HELI-CAL FLEXURES are precision equipment manufactured by slitting cylindrical materials " spirally" by unique machining technology.
They are multipurpose and multifunctional....

Features
Low-noise

* Built-in ( helical) gears are precision-machined from special steel and subject to carburizing and quenching to ensure high-efficiency, low-noise....

It is an integral-structured metal coupling with two spiral slits in the round material. It has a higher torsional rigidity compared with the HELI-CAL A model with single spiral....

It is an integral-structured metal coupling with a single spiral slit in the round material. A perfect integrated construction eliminates backlash. Maximum parallel offset 0.25mm....

Features
High-efficiency, low-noise

High-ratio hypoid gears are subject to CBN grinding following heat treatment to remove distortions in the metal, ensuring high-efficiency, ....

The SFC model is a metal disk type coupling with lightweight and high-strength aluminum alloy used for the clamp hub. It has a high torsional rigidity and responsiveness. The SFC....

Starflex has a simple construction of two hubs with one element inside. There are 2 kinds of elements that are different in hardness, selectable according to misalignment and....

High-efficiency, low-noise

High-ratio hypoid gears are subject to CBN grinding following heat treatment to remove distortions in the metal, ensuring high-efficiency, low-noise....

It is an integral-structured metal coupling with a single spiral slit in the round material. A perfect integrated construction eliminates backlash. Maximum parallel offset 0.25mm....

Features High torque:

High torque proportional to the reduction ratio
High-efficiency, low-noise

Built-in gears are precision-machined from special steel and subject to....

The SFM and SFF model are metal disk couplings with high precision and speed control developed for machine tools. The SFM model is designed for a main shaft of machine tool, and....

Features

Cylindrical worm gears allow high reduction ratios in lightweight, compact designs. In addition, they operate quietly and are relatively easy to assemble.
The worm....

Using a pair of our original HRH gears, Nissei has achieved the remarkably high reduction ratio of 1: 360.
These gears are notable for their effectiveness in decreasing....

The SFS and SFH model are metal disk type couplings. Carbon steel is used for the body material. Very high torsional rigidity assures accurate shaft rotation and ultra precision....

Unlike spiral bevel gears, hypoid gears are characterized by a pinion axis that is offset from the center of the gear axis.
Tooth engagement is characterized by the addition of....

When rotating the rotating shaft, the dial rotates in the same direction. A clockwise or counterclockwise type is selected for a dial. A dial without a scale is also available for....

Compared to straight bevel gears, the improved contact ratio of spiral bevel gears allows them to rotate more smoothly offering superior noise and vibration quality.
Custom....

This is a model with satisfactory design and function adding a handle part to the stand-alone model SD-53/ 75. A large variety of handle outside diameters from 66mm to 250mm are....

A stand-alone model is classified into 38, 53 and 75 according to the outside diameter.

The size 38 is an integrated model with handle that is used by mounting directly on a....

Features ;

Usually paired with spur or similar gears, internal gears feature teeth that are located on the inside of the gear.
The ability to distribute load with two or more....

When rolling up a film, fabric or thread, the diameter differs between beginning and end of take-up, and the tension added to the material constantly varies.
If stretch material....

Torque is transmitted by engagement of teeth and large torque can be transmitted even though the clutch is small.
There are " full position" with entire circumference engagement....

Features ;

Spur gears are the most frequently used type of cylindrical gear.
Thanks to the absence of thrust, spur gears feature simple overall design, assembly, and low....

Introduction of control systems is gaining for automated machinery in various fields. Especially, position control systems are used for all kinds of automated machinery. We offer....

OPL Permanent-Magnet Mag-Particle Slip Clutch
( Torque Range: 0.27~ 3.5in-lbs / 0.03~ 0.4Nm) .
Low cost slip clutch design for momentary and/ or continuous slipping. Torque is....

These dedicated power supplies are developed to maximize the performance of Miki Pulley electromagnetic clutches and brakes. A variety of 12 models are available. The appropriate....

MWC Electromagnetic Multiple-Disk Clutch.
( Torque Range: 18~ 8851ft-lbs / 25~ 12000Nm)
Multiple disk clutches designed for high torque small environment. Clutches are designed....

Several clutches and brakes could be used when designing a complex mechanism.
Various units are available to eliminate a troublesome task to combine the required number of each....

MDB-N Electromagnetic Multiple-Disk Brake.
( Torque Range: 13~ 826ft-lbs / 18~ 1120Nm)
Multiple disk brakes designed for high torque small space environment. Multiple disks....

d Brakes
Compatible with overall general industrial machinery and the rational design offers good performance.
The 101 and CS model ( clutch) and the 111 model ( brake) with the....

MDC Electromagnetic Multiple-Disk Clutch.
( Torque Range: 13~ 6196ft-lbs / 18~ 8400Nm)
Multiple disk clutches designed for high torque small space environment. Multiple disks....

Ideal for use in small precision equipments such as business machine, communications equipment or automobile machinery that has a susceptibility to fluctuations of torque and....

HC Electromagnetic Hysteresis Clutch.
( Torque Range: 0.4~ 8.9in-lbs / 0.05~ 1Nm)
Hysteresis clutch for industrial application. Torque is independent of slip speed and can be....

HB Electromagnetic Hysteresis Brake.
( Torque Range: 0.4~ 8.9in-lbs / 0.05~ 1Nm) .
Hysteresis brake for industrial application. Torque is independent of slip speed and can be....

PET Permanent-Magnet Eddy-Current Clutch/ Brake
( Torque Range: 0.18~ 8.9in-lbs / 0.02~ 1Nm) .
Eddy current clutch, torque is proportional to rpm. Since torque is transmitted....

PHT Permanent-Magnet Hysteresis Clutch/ Brake
( Torque Range: 0~ 62in-lbs / 0~ 7Nm) .
Permanent magnet hysteresis units can be configured as a clutch or a brake depending upon....

FNB Electromagnetic Spring Applied Brake.
( Torque Range: 9 ~ 71 in-lbs/ 1~ 8 N-m)
A small spring applied brake with a very thin profile which is mainly used for robotic and....

PMB Electromagnetic/ Permanent-Magnet Brake * North America only* .
( Torque Range: 3.5~ 265in-lbs / 0.4~ 30Nm)
Permanent magnet brake designed for industrial and mobile....

OGURA CLUTCH AND BRAKE;

RNB Electromagnetic Spring-Applied Brake
( Torque Range: 1.5~ 148ft-lbs / 2~ 200Nm)
Spring applied holding brake designed for general industrial....

RNB-Z Electromagnetic Zero-Backlash Spring-Applied Brake.
( Torque Range: 1.5~ 12ft-lbs / 2~ 16Nm) .
Spring applied holding brake designed for general industrial applications.....

MZS Electromagnetic Single-Position Tooth Clutch.
( Torque Range: 18~ 184ft-lbs / 25~ 250Nm)
Clutch is designed for high torque small space environments where no slip and only....

Electro-magnetic clutch and brake are equipment for connecting, disconnecting, braking and holding of machinery by electromagnetic power generated by coil energization. They are....

MP Electromagnetic Clutch/ Brake.
( Torque Range: 4~ 443in-lbs / 0.5~ 50Nm)
Clutch/ brake units are designed for extremely fast response, a high cycles applications. Because of....