Screen clamping saddle 19 mm / 0.741 in wide including knurled screw
Terminal Block Accessories 790-116

shield ( screen) clamping saddle 16mm

Screen clamping saddle 11 mm / 0.433 in wide including knurled screw
terminal Block Accessories 790-108

2 Conductor Terminal block 16 mm2 - Grey
2 Conductor Terminal block 16 mm2 - Orange
2 Conductor Terminal block 16 mm2 - Blue
2 Conductor Ground Terminal block 16 mm2 - Green/ ....

X-Com System 769-110
1-Conductor female plug to be fixed on receptacle terminal blocks or male connectors 10 pole

X-Com System 769-101
1-Conductor female plug to be fixed on receptacle terminal blocks or male connectors 1 pole

X-Com System 769-108
1-Conductor female plug to be fixed on receptacle terminal blocks or male connectors 8 pole

X-Com System 769-112/ 021-000
1-Conductor female plug with lateral locking levers 12 pole

X-Com System 769-104/ 021-000
1-Conductor female plug with lateral locking levers 4 pole

2-Conductor terminal strip 2 pole with fixing flange
Standard Chassis Mount Blocks 260-102

Screwless end stop 6 mm / 0.236 in wide
end stopper 6mm

Steel carrier rail 35 x 7.5 mm slotted
rails-en-perf-low

Steel carrier rail 35 x 7.5 mm unslotted
rails-en-unperf-low

2-Conductor terminal strip 2 pole with snap-in mounting foot

4-Channel analog output module  ± 10 V I/ O module for testing

4-Channel analog input module PT 100 / rtd for resistor sensors

PROFIBUS dp/ v1 fieldbus coupler 12 mbaud digital and analog signals

CAL fieldbus coupler 10 kbaud - 1 mbaud digital and analog signals

INTERBUS fieldbus coupler digital and analog signals I/ O module for testing

PROFIBUS dp/ fms fieldbus coupler 12 mbaud digital and analog signals

Ii/ o-lightbus fieldbus coupler 2.5 mbaud digital and analog signals

Separator plate 2 mm / 0.079 in thick oversized separator - gray

End and intermediate plate 2.5 mm / 0.098 in thick

2-Conductor through terminal block
TERMINAL BLOCK, DIN, 24A, GREY

4-conductor through terminal block suitable for Ex e applications suitable for Ex i applications

4-conductor through terminal block suitable for Ex e applications

4-conductor through terminal block suitable for Ex e applications

SERVICE CONNECTOR; CAGE CLAMPÂ ® CONNECTION

2-Conductor lighting connector standard type continuous service temperature 105Â ° c

4-Level terminal block for matrix patching without locking clips suitable for Ex i applications - blue

4-Level terminal block for matrix patching without locking clips-grey

The digital input modules receive the control signal from digital field devices
( sensors, etc.) .
Each input module has a noise-rejection filter. This filter is available with
....

This buscoupler interfaces the I/ O modules of the WAGO-I/ O-SYSTEM to
PROFIBUS DP.
When initializing, the buscoupler determines the module structure of the node,
to create....

End and intermediate plate 1.1 mm / 0.043 in thick locking device end plate

1-CONDUCTOR / 1-PIN RECEPTACLE TERMINAL BLOCK according to EN 60715

2 Conductor Terminal block 10 mm2 - Grey
2 Conductor Terminal block 10 mm2 - Orange
2 Conductor Terminal block 10 mm2 - Blue
2 Conductor Ground Terminal block 10 mm2 - Green/ ....

2 Conductor Terminal block 6 mm2 - Grey
2 Conductor Terminal block 6 mm2 - Orange
2 Conductor Terminal block 6 mm2 - Blue
2 Conductor Ground Terminal block 6 mm2 - Green/ ....

2 Conductor Terminal block 4 mm2 - Grey
2 Conductor Terminal block 4 mm2 - Orange
2 Conductor Terminal block 4 mm2 - Red
2 Conductor Terminal block 4 mm2 - Blue
2 Conductor....

2 Conductor Terminal block 2.5 mm2 - Grey
2 Conductor Terminal block 2.5 mm2 - Orange
2 Conductor Terminal block 2.5 mm2 - Red
2 Conductor Terminal block 2.5 mm2 - Blue
2....